DISSECTING PIN: Plastic head

DISSECTING PIN: Plastic head

• A 45 mm long dissecting pin with a plastic head on one end.
• Pack of 100.

(Wikipedia excerpt: ..."...The development of the pin closely paralleled that of its perforated counterpart, the needle. Archaeological evidence suggests that curved sewing pins have been used for over four thousand years. Originally, these were fashioned out of iron and bone by the Sumerians and were used to hold clothes together. Later, pins were also used to hold pages of books together by threading the needle through their top corner.[3]

Many later pins were made of brass, a relatively hard and ductile metal that became available during the Bronze Age. This development was followed by the use of steel which was much stronger but tended to rust when exposed to humid air. The development of inexpensive electroplating techniques allowed the steel to be plated with nickel. Nickel did not rust, but tended to flake off the steel in humid weather, again allowing it to rust. However, this took many months or even years to happen, and as nickel plated steel pins were usually used only temporarily to hold cloth in place prior to sewing, no further refinement has been considered necessary. However, some modern specialty pins are made out of rust-proof and very strong titanium.[4]....")

[Got more questions? Email us your query.] | [Home Page]