Account
OSCILLOSCOPE PROBE
$ 41.65 excl. GST
• A quality Oscilloscope Probe set.
• Contents comprise:
– 1.2m terminated cord at one end that has a moulded-on stainless steel BNC connector,
– A 1x/10x attenuator probe with adaptor slides that changes the probe tip to a spring hook,
– Earthing lead 180mm long with alligator clip.
– Attenuation Ratio 10:1,
– Bandwidth DC ~40MHz (±1dB) | ~60MHz (±1dB),
– Input Resistance ~10Mega-Ohms,
– Input Capacitance ~22pF,
– Max Input Voltage: DC 600V | 1:1 | ~3MHz (±3dB) | ~6MHz (±3dB) | ~1Mega-Ohm | ~180pF | DC 600V.
(Note: Not to be used for EHT voltage, as 100x is required.)
Out of stock. (can be backordered).
OSCILLOSCOPE PROBE
• A quality Oscilloscope Probe set.
• Contents comprise:
- 1.2m terminated cord at one end that has a moulded-on stainless steel BNC connector,
- A 1x/10x attenuator probe with adaptor slides that changes the probe tip to a spring hook,
- Earthing lead 180mm long with alligator clip.
- Attenuation Ratio 10:1,
- Bandwidth DC ~40MHz (±1dB) | ~60MHz (±1dB),
- Input Resistance ~10Mega-Ohms,
- Input Capacitance ~22pF,
- Max Input Voltage: DC 600V | 1:1 | ~3MHz (±3dB) | ~6MHz (±3dB) | ~1Mega-Ohm | ~180pF | DC 600V.
(Note: Not to be used for EHT voltage, as 100x is required.)
(Wikipedia excerpt: ..."An oscilloscope (formerly known as an oscillograph, informally scope or O-scope) is a type of electronic test instrument that graphically displays varying voltages of one or more signals as a function of time. Their main purpose is capturing information on electrical signals for debugging, analysis, or characterization. The displayed waveform can then be analyzed for properties such as amplitude, frequency, rise time, time interval, distortion, and others. Originally, calculation of these values required manually measuring the waveform against the scales built into the screen of the instrument.[1] Modern digital instruments may calculate and display these properties directly....")
