AIR CORE INDUCTOR [Inductance]: 1-Henry

AIR CORE INDUCTOR [Inductance]: 1-Henry

•   A 1-Henry Air Core Inductor wound on a bobbin and capable of handling a current of up to 0.2-amps.
•  Terminated with 4mm banana socket.

(Wikipedia excerpt: ..."An inductor, also called a coil, choke, or reactor, is a passive two-terminal electrical component that stores energy in a magnetic field when an electric current flows through it.[1] An inductor typically consists of an insulated wire wound into a coil.

When the current flowing through the coil changes, the time-varying magnetic field induces an electromotive force (emf) (voltage) in the conductor, described by Faraday's law of induction. According to Lenz's law, the induced voltage has a polarity (direction) which opposes the change in current that created it. As a result, inductors oppose any changes in current through them.

An inductor is characterized by its inductance, which is the ratio of the voltage to the rate of change of current. In the International System of Units (SI), the unit of inductance is the henry (H) named for 19th century American scientist Joseph Henry. In the measurement of magnetic circuits, it is equivalent to ⁠weber/ampere⁠. Inductors have values that typically range from 1 μH (10−6 H) to 20 H. Many inductors have a magnetic core made of iron or ferrite inside the coil, which serves to increase the magnetic field and thus the inductance...")

[Got more questions? Email us your query.] | [Home Page]